18W-60W All Embedded slim LED Panel Light, 110-130lm/w, 2700K-6500K, 200-240VAC, 5 years Warranty

Item No.: CR-PLCXXXYYYY-ZZW-AA
Benefits of embedded LED light panel
► Custom Service available.
► Unique mold of Crown-LED, elegant outlook.
► Installation Ways: Clip-in / Recessed / Suspended / Surface Mounted.
► Low glare, Flicker Free.
DATASHEET Introduction Installation-ways

Below are all existed standard sizes for Embedded LED Panel Light, other customized sizes are welcome. The panel light size/CRI (Ra 98 max)/CCT/Wattage/Lumen and etc can be customized.

 

Specification of embedded panel lights
Model Power Voltage Efficiency Product Size
mm
Cut-out Size
mm
CCT Beam Angle
CR-PLC320320-15W 15W AC220-240V 110-120lm/W 320x320 300x300 2700K-6500K 120°
CR-PLC320320-20W 20W AC220-240V 110-120lm/W 320x320 300x300 2700K-6500K 120°
CR-PLC320620-20W 20W AC220-240V 110-120lm/W 320x620 300x600 2700K-6500K 120°
CR-PLC320620-30W 30W AC220-240V 110-130lm/W 320x620 300x600 2700K-6500K 120°
CR-PLC3201220-40W 40W AC220-240V 110-130lm/W 320x1220 300x1200 2700K-6500K 120°
CR-PLC3201220-60W 60W AC220-240V 110-130lm/W 320x1220 300x1200 2700K-6500K 120°
CR-PLC618618-40W 40W AC220-240V 110-130lm/W 618x618 600x600 2700K-6500K 120°
CR-PLC618618-60W 60W AC220-240V 110-130lm/W 618x618 600x600 2700K-6500K 120°
Material IP CRI(Ra) LED Operating Temperature Lifetime Warranty
Aluminum + PC IP20 >80 SMD 4014 -20~+50°C >50000h 5 years
Optional LED Drivers
Non dimmable
(flicker free)
Triac dimmable
(flicker free)
0-10V
(flicker)
0-10V
(flicker free)
Dali
(flicker free)
ENERGY SAVING: The Edge-Lit Flat LED Panel can replace halogen bulb, saving in energy consumption up to 82%.

DIMMABLE: For the NON-dimmable panel, connect the AC mains power to the LED driver;   The optional dimming can be achieved by either of the following 3 methods:
    1) TRIAC dimming - with a conventional wall mounted TRIAC dimmer switch using your existing wiring.
    2) 0-10V dimming - using a 0-10v dimmer switch to connect our 0-10V dimmable LED Driver (please note that control wires are required from the dimmable driver to the switch).
    3) Dali dimming - using a Dali dimmer switch to connect our Dali dimmable LED Driver (please note that control wires are required from the dimmable driver to the switch).

• Application: This LED Panel light is developed to illuminate surfaces or rooms evenly.  The large beam angle is suitable for illuminating surfaces or rooms, use this  long-lasting, top-quality brightness LED panel light for nearly any indoor space like home lighting, office lighting, basement lighting, light box and sign backlighting, school lighting and hospital lighting.

INSTALLATION:  The LED light is operated with constant current LED Driver, it can be recessed in T-Grid ceiling You can install the panel light by following the INSTRUCTION MANUAL(included in the package);  No accessories for T-Grid installation; Two alternative mounting options (Required accessories) are available: Cable Suspension kits ( for ceiling mounting with a contemporary look) and surface mounted boxes ( for concrete or plasterboard ceilings/walls).

• CERTIFICATION: The LED panel light is qualified by "TUV CE" and "RoHs", The LED Drivers are qualified by "UL, FCC, CE, GB, RoHs and etc.; Get started to choose Crown-LED panel with confidence.

Replace traditional fluorescent lamps:  It's ideal as a direct replacement for existing four-tube fluorescent modular fittings. No annoying flicker or buzz. Perfect for either retrofit application or new construction, this panel installs easily in suspended grid ceilings and troffer fixtures.

Warranty: We offer a 5-year warranty on our LED Panel Lights and free consultation and advice on how to pick the most suitable LED lighting for your specific situation.

You Can Install Crown-LED Panel Lights in four simple Steps:
1. Switch off the power;
2. To replace the old light, firstly disconnect the old lamp from the mains and remove it, Or to install our LED panels in new construction, choose any type of below LED Panel Lights installations Ways;
3. Wire the LED panel light driver to the mains;
4. Connect the male/female connector.


ONE LUMINAIRE, FOUR INSTALLATION WAYS


I. Embedded LED Panel Light with Clips

Carefully make a cutout as per the required size. Fit the clips buckles to the panel light and then clip-in the led panel to the ceiling.



 


II. Recessed LED Panel Light

Place the light panel into the recessed ceiling and do all necessary connections.

No accessories needed for recessed installation, but you can also add 2 safety wires for better protection.


 

III. Suspended LED Panel Light

If you want to install the panel light with suspension kits, pls remark in the PO.
Each LED Panel light comes along with one set (4pcs/6pcs per set) of stainless steel braided cables and mounting hardware.
Suitable for all ceilings without ceiling hole.

 

 


IV. Surface Mounted LED Panel Light

You need to order surface mounting frame if you want to install the ceiling panel light by surface mounting. 

Suitable for all ceilings without ceiling hole.



                                                                                    Download the detailed Installation Manuel from our Download Center.
 

Review

Subscribe
We will share with you our latest product info or LED industy info. Thanks.