Integrated solar LED street light
Views : 184
Author : Crownda.LED
Update time : 2021-08-17 13:40:19
Integrated solar LED street light
Nowadays, more and more new rural areas choose to use all in one solar street bulbs. Farmers’ economic income is limited. If you use city circuit lights, you will have an electricity bill every year, which is very uneconomical. However, rural all in one Integrated Solar Street Lamps use sunshine energy to convert electricity, so you don’t need to spend electricity. It's economical.
Manufacturers of all In one & integrated solar street lighting remind that the controller is a key component of the entire solar street fixture system as a manager. Its major function is to manage the battery. A good controller should set various key parameter points according to the characteristics of the battery, such as overcharge point, overdischarge point of battery, recovery connection point and soc discharge control, etc. When choosing a solar street lamp controller, you need to pay attention to the controller's recovery connection point parameters. Because the battery has voltage self-recovery characteristics, when the battery is in an over-discharged state, the controller cuts off the load, and then the battery voltage recovers. If some time any point of the controller parameters is set improperly, the lamps may flicker and shorten the life of the battery and light source.
For the nature of solar led street light lighting, merchants must clarify the product model of led solar street light when purchasing, which can facilitate future maintenance work. Products after repairs should be reported back to the manufacturers in time, so that they can effectively avoid the recurrence of such failures in the solar LED integrated street lights produced in the future.
Therefore, this article reduces the ambient temperature through the heat dissipation conditions of the LED street lamp system, the luminous efficiency of the LED and the efficiency of the power supply, so that the LED power supply matches the life of the LED chip, and realizes real energy saving, environmental protection and long life. The response speed is fast, the unit is small, and under the same brightness, the power consumption is one-tenth of that of incandescent lamps and one-third of fluorescent lamps. But the service life is 50 times that of incandescent lamps and 20 times that of fluorescent lamps.
Products after incandescent lamps, fluorescent lamps, and gas discharge lamps. Solar cells: The role of solar panels is to convert the sun's radiant energy into electrical energy, which is sent to the storage battery through the controller for storage. Advantages and measures: the outer surface of the heat-dissipating lamp housing is provided with a led light board, the outer side of the led light board is provided with a light-transmitting plate, a number of lenses are provided on the light-transmitting plate, the bottom of the base is provided with a mounting tube, and the mounting tube includes a set In the outer cast iron layer of the outer layer, vibration damping is provided on the inner side of the outer cast iron layer.
Secondly, the municipal electric lights must occupy farmland, and they need to excavate channels during installation, which occupies a lot of land, while all in one LED solar street lights only need a place as the size of a battery, without additional floor space, saving manpower and material resources. This is because all aspects are combined, all in one LED solar street luminaires are more economical and more affordable. It has many advantages, the comprehensive effect of integrated solar powered street bulbs is better, and the investment and use of new rural construction. In the days to come, it will also become more popular.
The rural solar street LED luminaire project mainly needs to consider the comprehensive cost in addition to the product cost, including transportation costs, installation and commissioning costs, service costs, convenient maintenance and so on.
Related products
ARQ Series Shoebox LED lights, UL DLC listed, 100W-400W, 5-10 Years Warranty, 100-480VAC, 140-200lm/W
► UL/cUL/SAA/FCC/CE/Rohs Approval
► DLC 5.1 Premium
► Photocell, Daylight harvest, Microwave Sensor, 0-10V Dim Optional
► Multi-Voltage: 100-277V/100-347V/480Vac
► 100W-400W, 140-200 lm/W
► IP66, 5-10 years warranty
Subscribe
We will share with you our latest product info or LED industy info. Thanks.
