Why solar street lights turn on during the day?
Views : 614
Author : Shenzhen Crown Lighting
Update time : 2021-07-01 10:35:08
Why solar street lights turn on during the day?
Nowadays, solar led garden street lamps are installed in urban areas. All in one integrated solar garden and street light only bring light to people at night, but also dress up the city at night. However, some wholesale solar street lights turn on during the day, not only wastes energy, but also cannot work normally at night. So what causes China all in one solar street lights to turn on during the day? Crownda will give you a detailed introduction.
1. Solar panels convert sunlight energy into electrical energy. The stronger the light, the weaker the light, the lower the output light. The output voltage of the battery panel can be used as a basis to turn on the street light led when the voltage is lower than a certain level, and turn off the street light when the voltage is higher than a certain level.
2. If the solar panel is covered, it will also cause the solar street lamp to not be able to be used normally, heavy snow cover, and dust cover. When these coverings cover the solar panels, the output voltage of the solar panels will be lower than a certain value, and the electric solar street lights will be triggered to light up.
3. The solar street light controller displays the undervoltage state, and does not turn on after dark, but the battery voltage has exceeded the undervoltage value, indicating that the battery is charged. After the battery drops to this voltage point, the controller turns off the power supply and stops discharging, mainly to protect the battery from being over-discharged and affecting the subsequent use of the entire equipment. The charging voltage will continue to discharge only when it is charged to 24V (the default value of the controller). The main purpose of this setting is to prevent the battery from being damaged by deep discharge. In the case of battery undervoltage, if the all in one type solar street lights controller is not restarted, the voltage between 22.2 volts and 24 volts is under voltage, and the battery will continue to discharge only when the battery voltage of the smartbright All-in-one solar street light luminaires is charged to more than 24 volts.
4. The photoresistor is particularly sensitive to light. When the light intensity is weak, the resistance is large. As the light becomes stronger, the resistance value decreases. A balance point can be found by sliding the rheostat. When the light is strong, the photoresistor value is small. The use of photoresistors has certain disadvantages. Photoresistors have relatively high requirements for installation, and are prone to miscontrol in rainy, cloudy and other conditions.
The above are reasons for the Led solar street light outdoor to be bright during the day. In addition, there is a relatively small reason because in rainy weather, the solar radiation absorbed by the solar panels is insufficient, and the power output is weak, and the controller will think that it is dark. It will automatically light up.
Related products
ARQ Series Shoebox LED lights, UL DLC listed, 100W-400W, 5-10 Years Warranty, 100-480VAC, 140-200lm/W
► UL/cUL/SAA/FCC/CE/Rohs Approval
► DLC 5.1 Premium
► Photocell, Daylight harvest, Microwave Sensor, 0-10V Dim Optional
► Multi-Voltage: 100-277V/100-347V/480Vac
► 100W-400W, 140-200 lm/W
► IP66, 5-10 years warranty
Subscribe
We will share with you our latest product info or LED industy info. Thanks.
