The difference between LED street lamp and traditional street lamp

The difference between LED street lamp and traditional street lamp


The difference between LED street lights and traditional street lights

1. Comparison of electricity costs between street LED lights and traditional street lights:

Using 60W LED streetlights in a year’s electricity bill is only 20% of the electricity bill in a year using 250W ordinary high-pressure sodium street lamps, which is a big saving.

It saves electricity expenses and is an ideal energy-saving and consumption-reducing street LED lighting product. It also conforms to the trend of building a conservation-oriented society.

2. Comparison of the laying cost of LED road lights and traditional road lights:

The power of lights led street is 1/4 of that of ordinary high-pressure sodium street lighting lamps, and the cross-sectional area required for laying copper cables only requires 1/3 of that of ordinary street lights, saving a lot of laying cost.

Combining the above two cost savings, the use of flood light street lights is compared with ordinary high pressure sodium street lights. The former allows the owner to recover the initial increase in investment costs within one year.

3. Comparison of illuminance between lighting street lamp and traditional street lamp:

Using LED 60W street light can reach the illuminance of 250W high pressure sodium lamp, which greatly reduces the using power.  Roadway led lightings can be combined with wind and solar energy because of their low power, and can be used on urban secondary roads.

4. The temperature comparison between commercial Street Lights and traditional street lights:

Compared with ordinary street lamps, LED street lamps produce lower temperature during use, and will not produce high temperature in continuous use, and will not turn black or burn the lampshade.

5. Comparison of safety performance between outdoor led street lights and traditional street lights:

At present, cold cathode lamps and induction lamps on the market use high-voltage point poles to stimulate X-ray illumination, and contain harmful metals such as mercury, and harmful rays. In contrast, LED outdoor street lamps are safe and low-voltage products. In the process, the potential safety hazards are greatly reduced.

6. Comparison of environmental protection performance between LED street lights and traditional street lights:

Ordinary street lamps contain harmful metals, and the spectrum contains harmful rays. In contrast, LED street lights have a pure spectrum, no infrared and ultraviolet rays, no radiation, no light pollution, no harmful metals, and waste can be recycled, which is a typical green lighting product.

7. Comparison of the service life and quality of LED roadway lightings and traditional street lamps:

The average service life of ordinary street lights is 12,000 hours. The replacement of streetlights is not only costly, but also affects traffic. It is especially inconvenient to construct in tunnels and other places. The average lifespan of LED area and LED street light is 100,000 hours. Based on 10 hours of daily use, the service life is as long as ten years. In addition, LED street and roadway lamps have good water resistance, impact resistance, and shock resistance, and their quality is stable. They are maintenance-free products during the warranty period.